Published on: 2024-02-01 11:45:39
Categories: 12
Share:
Nemetschek SCIA Engineer a few structural analysis and design software for a variety of projects there. The software has a whole spread of the capabilities of different. This software can be used for a variety of projects designed buildings for office, plant and equipment and Bridges in the user interface easy to use.
HARDWARE COMPONENTS
| Minimum | Advised | |
| Processor | Intel Core-i5 or AMD Ryzen 5 or similar | Intel Core-i7 or AMD Ryzen 7 or similar |
| Memory (RAM) | 8 GB | 32 GB, or more |
| Graphics Controller | 256 MB, supporting OpenGL | 4 GB, or more |
| Free disk space | 5 GB, SSD | / |
| Resolution | Full High Definition * | / |
*4K is supported for the new interface of SCIA Engineer 21
A 3D mouse is not supported.
SOFTWARE COMPONENTS
| Supported Windows OS | Windows Server 2008 R2 (64 bit), but only licensing is tested Windows Server 2012 R2 (64 bit) Windows Server 2016 (64 bit) Windows Server 2019 (64 bit) Windows 10 (64 bit) |
| API link with Revit (http://www.scia.net/revit) | SCIA Engineer 21 is compatible with: Revit 2020, Revit 2021 |
| API link with Tekla | SCIA Engineer 21 is compatible with: Tekla Structures 2019 Tekla Structures 2019i Tekla Structures 2020 |
| Etabs | SCIA Engineer 21 is compatible with: Etabs 9.2 |
| IFC | SCIA Engineer 21 is compatible with: IFC version 2×3 IFC4 (only import) |
| SDNF | SCIA Engineer 21 is compatible with: SDNF version 2.0 SDNF version 3.0 |
Below you can find additional information concerning the hardware components.
PROCESSOR
For the processor two parameters are important: the number of cores and the clock frequency. When you perform a linear calculation, the number of cores is the main parameter that determines the speed of the calculation. In a nonlinear and eigenmode calculation, the clock frequency is the determining factor. Next to the previously mentioned calculation types, the design checks run multicore as well. We advise an Intel Core i7 or AMD Ryzen 7 with at least 2.4 GHz.
MEMORY (RAM)
SCIA Engineer, the solver and the Engineering Report are 3 separate processes that each require memory to perform their actions. Next to these processes, also Windows (min. 1.5 GB) and all other applications take some memory in use as well. To not run out of memory when performing memory demanding calculations, we advise to have at least 16 GB or more RAM in the computer.
GRAPHICS CONTROLLER
A minimum memory of 256 MB and the support of OpenGL is required to run SCIA Engineer. This means that SCIA can also be run with an onboard graphics card. For some models that are graphically more demanding, the onboard graphics card may fail to render the structure. For this reason, we advise a dedicated GPU (Graphical Processing Unit). A low to mid end GPU should be adequate.
HARD DISK DRIVE (HDD)
Every hard disk with a free disk space of 5 GB can be used to run SCIA Engineer. This does not mean that the HDD is not important. The read/write speed of the HDD has an influence on the performance of SCIA Engineer. In order to increase performance, we recommend an SSD (Solid State Drive). Some available SSD types are:
Check out Readme.txt in Crack folder
The crack of the 2018 and 2019 version is the same as the crack of the 2015 version; By applying this crack, the New option is disabled, which can be solved by using Project Manager; More details are given in the Crack folder.
Differences between x86 & x64 editions
For any question Contact us
3.18 GB
Sharing is caring: